|
林維新
一、研究成果
A.期刊論文:(作者姓名、著作名稱、期刊名稱、卷數、起始頁數、年) 1. W. S. Lin, K. S. Wang, and H. Z. Po, “Tool wear monitoring by abductive network for turning“, Journal of the Chinese Society of mechanical Engineers, Vol. 20, No. 6, pp.527-534 (1999). (EI)
2. W. S. Lin and K. S. Wang, “Modeling and optimization of turning process for slender parts“, Int. J. Prod. Res., Vol. 38, No. 3, pp.587-606 (2000), (SCI)
3. K. S. Wang, W. S. Lin and F. S. Hsu, “A new approach for determining the Reliability of cutting tool”, International Journal of Advanced Manufacturing Technology, 17, pp.705-709 (2001). (SCI)
5. S. F. Yu, B. Y. Lee and W. S. Lin, “Waveform monitoring of electric discharge machining by wavelet transform “, International Journal of Advanced Manufacturing Technology,17, pp.339-343(2001).(SCI)
6. W. S. Lin, B. Y. Lee and C. L. Wu, “Modeling the surface roughness and cutting force for turning”, Journal of Materials processing and Technology, 108, pp.286-293(2001).(SCI)
7. W.S. Lin, T.H. Liang, P.C. Huang, T.L. Huang and H. H. Wu, “ The study of high speed turning of the harden mold steel by CBN cutting tools”, Journal of the Chinese Society of mechanical Engineers, Vol. 26, no. 5, pp. 643-648 (2005,October). (EI)
8. W.S. Lin, “Reliability study of cutting tool based on the reliability-dependent hazard rate function”, Material Science Forum, Vol. 505-507, pp.913-918(2006). (SCI)
9. W.S. Lin, “ Cutting tool reliability assessment in variable cutting speed”, Journal of the Chinese Society of mechanical Engineers, Vol. 27, no. 2, pp. 267-271 (2006,April). (EI)
10. Lin Wei-Shin, Lee Bean-Yin and Chen Hung-Hsin,Monitoring surface roughness of turning by using image processing technology,Materials Science Forum, Vols. 532-533, pp. 1164-1167(2006,September).(SCI)
11. Wei-Shin Lin, The study of high speed turning of the hardened mold steel SKD11 by ceramic cutting tools, Key Engineering materials, vols.364-366, pp. 1015-1020.(2008, March)(SCI)
12. Wei-Shin Lin, The study of precision hard turning of the hardened mold steel, Key Engineering materials, vols.364-366, pp. 640-643.(2008, March)(SCI)
13. Wei-Shin Lin, Modeling the surface roughness for fine turning of AISI304 stainless steel, Key Engineering materials , vols.364-366, pp.644-648.(2008, March)(SCI)
14. Wei-Shin Lin, Shih-Miao Huang, Jui-Chang Lin, Rong-Yuan Jou, Chien-Hsing Chang, A Study of Process Parameter Optimization for Passive Component Precision Extrusion,Key Engineering materials , vols.364-366, pp. 634-639.(2008, March)(SCI)
15. Wei-Shin Lin, The reliability analysis of cutting tools in the HSM processes, Archives of Materials Science and Engineering, Vol. 30, no.2, pp.97-100 (2008, April).
16. Wei-Shin Lin, The study of high speed fine turning of austenitic stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, no. 2, pp. 191-194 ( 2008, April).
17. Chun-Feng Tseng, Wei-Shin Lin,The processing and fracture analysis on transmission shafts of a peanut harvester, Journal of Materials processing and Technology, 201,374-379 (2008).(SCI)
18.Jui-Chang Lin, Wei-Shin Lin, King-Sun Lee and Jing-Long Tong, The optimal clearance design of micro-punching die, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, no. 1, pp. 79-82 ( 2008, July)
19. Wei-Shin Lin, Tung-Sheng Yang, He-Jiun Hsieh and Chun-Ming Lin,Finite element simulation in flat rolling of multi-wire, The proceedings of ICADAM 2008 --Advanced Design and Manufacture to Gain a Competitive Edge, Springer, ( ISBN: 978-1-84800-240-1), pp. 101-110 (2008, July) ( EI ).
20. Wei-Shin Lin, The tool life analysis of ceramic turning tools under the cumulative action of different cutting speeds, The proceedings of ICADAM 2008 --Advanced Design and Manufacture to Gain a Competitive Edge( ISBN: 978-1-84800-240-1), Springer (2008, July) pp. 441-450 (EI ).
21. Wei-Shin Lin, Jui-Chang Lin , Kingsun Lee , Jiing-Herng Lee , Bean-Yin Lee, The reliability analysis of the precision micro-punch life with IC packing bag, The proceedings of ICADAM 2008 --Advanced Design and Manufacture to Gain a Competitive Edge( ISBN: 978-1-84800-240-1), Springer, (2008, July) pp. 741-748 (EI ).
22. Wei-Shin Lin, Chiu-Fan Hsieh, The static rigidity analysis of the position adjustable computer table, Materials Science Forum, Vol. 626 – 627, pp. 807-812, ( 2009), (EI)
23. Wei Shin Lin, Jui Chang Lin, Jeng Nan Lee, The Dimension Accuracy Analysis of a Vacuum Forming Mold for IC Packing Bag, Materials Science Forum, Vol. 628 – 629, pp. 441-446, (2009), (EI)
24. Jui-Chang Lin, King-Sun Lee ,Wei-Shin Lin, The optimal design of micro-punching die by using abductive and SA methods, Archives of Computational Materials Science and Surface Engineering, Vol.1, Issue.2, pp. 92-99, (2009)
25. 林維新, 梁敦皓, 吳信賢, 黃子倫, 黃柏鈞,落花生乾燥自動化技術, 國立虎尾科技大學學報,第28卷第2期,第11至18頁(2009,June)。
26. 林維新, 楊雅芬, 落花生收穫機傳動主軸破壞應力分析國立虎尾科技大學學報,第28卷第2期,第19至26頁(2009,June)。
B. 國內研討會
1. 林維新,切削刀具之可靠度分析,國立虎尾技術學院學報,第二期,民國88年3月(1999,march)。
2. 林維新,”被動式減振器之研製” ,國立虎尾技術學院學報,第三期,民國89年3月(2000,march)。
3. 林維新,侯嘉琳,柯振隆,黃淑華,馬澤榕,王智弘,王偉育,可提升細長工件車削表面精度之防振車刀座設計,國立虎尾科技大學學報,第一期,第121至128頁(2004,march)。
4. 林維新,林裕倫,陶瓷刀具在不同進給速率累積作用下之可靠度變化探討,國立虎尾科技大學學報,第二期,第113至124頁(2005,March)。
5. 林維新、蕭恩柔、王柏森、周梅雅、郭瑋旻、楊佑炘、楊義彬,硬化模具鋼材SKD11之精密切削研究,國立虎尾科技大學學報,第二期,第125至136頁(2005,march)。
6. 林維新、林修帆、林琮崴、謝嘉圻、王建座,硬化模具鋼材微細切削之表面粗糙度變化探討,國立虎尾科技大學學報,第25卷第2期,第1至6頁(2006,June)。
7. 林萬益、林維新、林琮崴、謝嘉圻、王建座、林修帆,表面粗糙度測量時之經濟測量次數探討,國立虎尾科技大學學報,第25卷第2期,第7至12頁(2006,June)。
8. 林維新,謝合鈞,曾加宏,李昱麟,陶瓷刀具在不同切削速度累積作用下之可靠度變化探討,國立虎尾科技大學學報,第25卷第3期,第1至8頁(2006,September)。
9. 林維新,陳建忠,車燈射出模具設計之知識化工程建立及應用,國立虎尾科技大學學報,第25卷第4期,第7至16頁(2006,December)。
10. 林維新,黃順義,鋅空氣燃料電池空氣電極製備與特性研究,國立虎尾科技大學學報,第25卷第4期,第1至6頁(2006,December)。
11. 許源泉,林維新,楊東昇,宋紹瑩,熱間擠伸模具磨耗之數值模擬與可靠度分析,技術學刊,第21卷第4期,pp.329-336(2006,December)。
12. 林維新,吳信賢,黃子倫,梁敦皓,落花生乾燥製程分析,國立虎尾科技大學學報,第26卷第2期,第1至8頁(2007,June)。
13. 林維新,碳化鎢刀具在各種不同切削速度累積作用下之刀具壽命分析,技術學刊,第22卷第2期,pp.161-165(2007,June)。
14. 林維新,車床用從動刀架之改良設計,技術學刊,第22卷第3期,pp.199-203(2007,September)。
15. 林維新、黃志魁、廖國強、蕭文奇、蘇耿南,真空式落花生播種機原理探討,國立虎尾科技大學學報,第27卷第1期,第25至32頁(2008,March)。
16. 林維新,邱博正,林宛盈,落花生收穫機皮帶輪軸之軸承保持器破壞分析,國立虎尾科技大學學報,第27卷第1期,第33至40頁(2008,march)。
17. 林維新,劉靜,林韋廷,快速下潛式水下載具之研究,國立虎尾科技大學學報,第27卷第2期,第1至10頁(2008,June)。
18. 林維新、楊東昇、林儁明、謝合鈞,多條線材同時進行扁平輥壓加工之研究,鍛造季刊,第17卷第2期,pp.14- 22(2008,June)。
19.林維新 蕭文奇,鑽石砂輪應用於溝槽磨削加工之性能研究,2009兩岸機電既產學合作學術研討會論文集,民國98年11月,新竹(2009)。
20.林維新、王喻民,工業用帶鋸機之切削參數探討,2009兩岸機電既產學合作學術研討會論文集,民國98年11月,新竹(2009)。
21.林維新、曾春風、李宗威,鍛零件之鍛造變形率對鍛後滲碳熱處理之影響探討,2009台灣鍛造協會年會論文發表會,民國98年11月,台中(2009)。
22.林維新,張世超,蔡孟皇,帶鋸機鋸帶疲勞壽命分析,中華民國第八屆可靠度與維護度技術研討會論文集,民國98年12月,雲林(2009)。
C.專書或其他
1.林維新,變速度切削之刀具壽命探討,高立圖書公司,民國88年3月。
2.林維新,S55C及S55C S1之鑽削性評估與比較,高立圖書公司,民國88 年3月。
D.曾參與之重要研究計畫
E.指導大專生研究計畫
1. 蕭恩柔,CBN刀具應用於精密模具高速切削研究(NSC-93-2815-C-150-011-E)93/07/01-94/02/28(經費3.90萬元)
2. 林修帆,硬化鋼材之精微切削研究(NSC-94-2815-C-150-008-E)94/07/01-95/02/28(經費4.70萬元)
3. 楊雅芬,落花生收穫機傳動主軸破斷應用分析(NSC-95-2815-C-150-005-E)95/07/01-96/02/28(經費4.70萬元)
4. 林宛盈,精密深孔切削加工刀具之結構分析(96-2815-C-150 -012 -E)96/07/01-97/02/28(經費4.70萬元)
二、服務
A.行政職
B.技術服務
C.參與其他校外學術團體與公益事務
1.中國機械工程師學會
2.台灣省教育會
3.國立虎尾科技大學教師會
4.台灣鍛造協會
瀏覽數
|