Yang, T. S., “A Finite Element Analysis for the Forging of Spur Gears”, Journal of Chinese Society of Mechanical Engineers, Vol. 26, pp. 547-552, 2005.(EI)
Lin, S. Y. and Yang, T. S., ”Investigation of Upsetting With Curved Dies Through Analytical and Numerical Methods”, Journal of Chinese Society of Mechanical Engineers, Vol. 26, pp. 539-545, 2005.(EI)
Yang, T. S. and Hsu, Y. C., “A Finite Element Analysis for the Forging Process of Hollow Spur Gear”, Journal of Material Science Forum, Vols. 505-507, pp. 733-738, 2006.(NSC-93-2622-E-150-049-cc3).(SCI)
Yang, T. S. and Hsu, Y. C., “An Analysis of The Hemisphere Deep Drawing Process of Metal Sheet”, Journal of Chinese Society of Mechanical Engineers, Vol. 27, pp. 81-86, 2006.(EI)
Hsu, Y. C., Yang, T. S., Sung, S. Y. and Chang, S. Y. “Constructing the Predictive Models of Friction Coefficient Using Cylindrical Compression Testing” Journal of Material Science Forum, Vols. 745-750, pp. 739-744, 2006. (SCI)
Hsu, Y. C., Yang, T. S., Wu, J. L. and Chen, Y. X., “The Hydroforming of Micro-square Tubes With Non-equal Section and Dendritic Shape” Journal of Material Science Forum, Vols. 505-507, pp. 739-744, 2006. (SCI).
Yang, T. S. and Hsu, Y. C., “Application of Abductive Network and FEM to Predict the Maximum Forging Force and the Final Face Width of Spur Gear”, Journal of Material Science Forum, Vols. 532-533, pp. 861-864, 2006.(SCI)
Yang, T. S. and Hsu, Y. C., “The prediction of Earing and the Design of Initial Shape of Blank in Cylindrical Cup Drawing”, Journal of Material Science Forum, Vols. 532-533, pp. 865-868, 2006.(SCI)
Wu, C. Y., Hsu, Y. C. and Yang, T. S. “Prediction and Design of the Optimal Punch Shape for Recess Forging”, Journal of Material Science Forum, Vols. 532-533, pp. 440-443, 2006.(SCI)
Yang, T. S. and Hsu, Y. C., “Study on the bulging deformation of the porous metal in upsetting”, Journal of Material Processing Technology, Vol. 177, pp. 154-158, 2006.(SCI)
Yang, T. S. and Lo, S. W. ”Contact simulation for predicting surface topography in metal forming”, Tribology Letters, Vol. 23, No. 2, pp. 121-129. 2006.(SCI)
Yang, T. S. “A Refined Friction Modeling for Lubricated Metal Forming Process”, Tribology Letters, Vol. 27, pp.289-300, 2007.(SCI)
Yang, T. S. “The Strain path and Forming Limit Analysis of the Lubricated Sheet Metal Forming Process”, International Journal of Machine Tools and Manufacturing, Vol. 47, pp. 1311-1321, 2007.(SCI)
Yang, T. S, Hwang, N. C. and Chang, S. Y. “The prediction of maximum forging load and effective stress for different material of bevel gear forging”, Journal of Mechanical Science and Technology, Vol. 21, pp. 1566-1572, 2007. ( SCI )
Yang, T. S and Shyu, R. F. “The design of blank’s initial shape in the near net-shape deep drawing of square cup” Journal of Mechanical Science and Technology, Vol. 21, pp. 1585-1592, 2007. ( SCI )
Yang, T. S. and Hsu, Y. C., Lin, H. S. and Chang, S. Y., “A finite element analysis for the initial blank’s shape design of sheet metal in deep drawing process”, Key Engineering materials, Vol. 363-365, pp. 980-985, 2008. ( SCI )
Hsu, Y. C. and Yang, T. S., “A predictive model construction of sheared planes in sheet metal shearing process”, Key Engineering materials, Vol. 363-365, pp. 590-594, 2008. ( SCI )
Yang, T. S. “Prediction of surface topography in lubricated sheet metal forming”, International Journal of Machine Tools and Manufacturing, Vol. 48, pp. 768-777, 2008.(SCI)
Yang, T. S. “The Application of Abductive Network and FEM to Predict the Limiting Drawing Ratio in Deep Drawing Process,” International Journal of Advanced Manufacturing Technology, Vol. 37, pp. 58-69, 2008.(SCI)
Yang, T. S. and Shyu, R. F. “A finite element analysis for the effects of process parameters and material anisotropy in the cylindrical deep drawing” Journal of Advanced Manufacturing Systems, Vol. 7, pp. 21-32, 2008
Yang, T. S. ”Finite element analysis of elliptic cup deep drawing of magnesium alloy sheet” Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, pp. 139-142, 2008.
Yang, T. S., ”Prediction of maximum forming load and billet dimensions using an abductive network and finite element method simulation of a near net-shaped helical gear forging”, Proc. IMechE Part B: J. Engineering Manufacture, Vol. 223, pp. 289-304, 2009. (SCI)
Yang, T. S., Fang, T.H., Kawn, C. T, and Ke, G.L., Application of Abductive Network and FEM to predict the Stress-Strain Curve with strain hardening Metals by Nanoindentation test, Nanotech 2007, Santa Clara Convention Center, USA, May 20-24, 2007. (ISBN: 1420063766)
Hsu,Y.C. Hsu, Yang, T. S., Cai, J. W. and Chen, Z. H., An Influence Analysis of Compression Stability for High-Aspect-Ratio Micro-Hollow Billets in Upsetting, 50th International Wissensches Kolloquium (50th IWK) , Technische Universitat llmenau, September, 21-23, 2005.
Hsu, Y.C., Lin, H.S., Yang, T.S., Influences of Cross-sectional Geometry and Surface Roughness on the Compression Stability in Upsetting High Aspect-Ratiop Shaped Billets by FE Analysis, Proceedings of IMECE 2006, 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA.
Yang, T. S. and Chang, S. Y., “Predictions of sprongback of strain-hardening material in V-shaped bending process”, International Conference on advanced manufacture, Tainan, Taiwan, 26-28, 2007.
Yang, T. S. and Shyu, R. F., “Investigation of the drawing process of a square rod from a round bar by using 3-D finite element analysis”, 8th Asia Pacific conference on material processing, Guilin and Guangzhou, China, 15-20 June, 2008.
Yang, T.S., Fang, T. H., Kawn, C. T., Ke, G. L. and Chang, S. Y., “Prediction of the bilinear stress-strain curve of engineering material by nanoindentation test” The 9th International Symposium on Measurement Technology and Intelligent Instruments, 2009 (ISMTII 2009), June 29 – July 2, 2009, Saint-Petersburg, Russia.
Chang, S. Y., Yang, T.S. and Chou, J.C. “Application of FEM simulation and abductive network to predict scratch characters for the engineering material” Advances in Materials and Processing Technologies, 2009 (AMPT 2009), October 26 - 29, 2009, Kuala Lumpur, Malaysia.
Yang ,T. S., Chang, S.Y., Chang, Y.Y., “Study on mechanical characteristics of TiAlN/CrN multilayered on H13 tool steels by Cathodic Arc Deposition process”, TACT 2009 International Thin Films Conference, December 14-16, 2009, Taipei, Taiwan.
Yang ,T. S., Li, S.Q., Chang, S.Y., “Prediction of surface parameters of asperity flattening in sliding contact for metallic thin film on die material during metal forming”, TACT 2009 International Thin Films Conference, December 14-16, 2009, Taipei, Taiwan.
Yang ,T. S., Chang, S.Y., ”Determination of constitutive properties of thin film on substrate by nanoindentation using FEM and abductive network”, World Tribology congress 2009, Kyoto, Japan, September 6-11, 2009.
Yang, T. S. “Finite element analysis of square cup deep drawing of pure titanium metal sheet at elevated temperatures” Advanced Design and Manufacture to gain a Competitive Edge, pp. 33-32, 2008. (ISBN 978-1-84800-240-1) (EI)
Lin, W. S., Yang, T. S., Hsieh, H. J. and Lin C. M. “Finite element simulation in flat rolling of multi-wire”, Advanced Design and Manufacture to gain a Competitive Edge, pp. 101-110, 2008. (ISBN 978-1-84800-240-1) (EI)